• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is significant, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll need to open the window to access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window repair to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close the window and perform a test fit. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease It could be hinges that are at fault. They can be repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like any mechanical component, hinges can wear out over time. Changing a window hinge is an easy procedure, but it is easier to do if you have someone to assist in holding the frame up.

Verify that the upvc window repair near me hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which way the window repair should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window repairs to open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to give them a clean but in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be put on top of your windowsill. They can keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your window repair near me made of upvc it is recommended to speak with a professional as soon as you can.