• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Change a Subaru Spare Key

When you lose your Subaru car key, contact a locksmith. Locksmiths will usually cut keys for you at a lower cost than the dealer.

Fob remote "push to start" intelligent keys or a simple metal key are the two main types of Subaru car keys. The Fob key will need to be programmed.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It can also open the trunk of your vehicle or the lift gate. The remotes use the keypad in your car to connect with your computer system in your vehicle.

Certain models of Subaru come with a lesser-known feature called PIN Code Access. You can use a customized number sequence to open and start your car. If you have a newer Subaru Forester, Outback, Crosstrek, WRX, WRX STI or Impreza that comes with this feature, check your owner's manual to see how to use it.

It's possible that the battery inside the key fob is dying. The first thing you'll need to check is that the battery is in good condition and you can accomplish this using a handheld remote tester or a basic multimeter in your home garage.

Next, you'll want to remove the key fob from its case, and then examine the circuit board that controls the transmitter. You'll be able to see two or three sets of 8-digits. Write down the first set so you can remember it. After that then put the key fob back together and you'll be able to program it at home. The procedure to do this differs based on the make and year of your car but it's generally simple enough to do yourself.

Key Fobs

Subaru's newest models are all equipped with key fobs that don't just unlock doors but also turn on your lights, lock the gas cap, and start your car. This last trick is particularly useful if been at a gas station and your car won't even start because the battery in the key fob has gone out.

It is likely that your Subaru's key fob, whether it's brand new or old can be replaced easily. Keep in mind that some of the more modern models, which have their top-of-the-line technology, might require a visit to the dealer. However, with just a little time and effort, you'll have your replacement key fob in place at home.

Start by opening the case and inspecting the circuit board of the transmitter. (Instructions on opening the case are usually given in the owner's manual). There should be two or more serial numbers with 8 numbers each. Write down the number that is the first in the series and keep it handy to refer to later.

Then, sit in your driver's seat and close all doors. Turn the key ten times to start your car, then switch it off. Press the lock button on your key fob, then open the door. This will test that your doors are functioning correctly. Then shut the door and take the key out of the ignition. You should hear your vehicle buzz again, which indicates that the key fob is programmed.

Ignition System

The key battery could be dead if your Subaru keys don't work as they should. If you are aware of the issue, you can replace the key fob's battery yourself. The battery replacement is cheap and simple to locate. If the key fob you have doesn't respond to your commands, there could be another problem. If you want to get a replacement key, it's recommended to visit a dealer. They can ensure that the key is genuine Subaru key, which is covered under warranty, and that it is programmed to your vehicle. This is far more secure and less expensive than purchasing an aftermarket key from a company on the internet.

You can also ask the dealer cut a brand new key if you supply them with your VIN and evidence of ownership. The information provided will be used to code the replacement key for subaru forester (https://www.cheaperseeker.com/u/streetbrush39) key so that it can be recognized by your immobilizer. This procedure is more complicated than cutting a key, and the dealer will generally charge a higher price for this service.

After the new key has been programmed then you'll be able change it over to your existing key. You'll only have five seconds to insert the second key, so it's vital to have an operational key in your pocket. You can remove the key once the security light has stopped flashing, and then test it.

Battery Replacement

One of the key advantages that make subaru impreza key replacement fobs so useful is their ability to switch on your car's power windows as well as sunroof with just a press of a button. However, the battery that is in the Subaru fob isn't made to last forever and will eventually need to be replaced. It's good news that replacing the battery is a simple procedure that you can carry out yourself with the help of this short guide from Capitol Subaru.

You'll need to locate the small gap that separates the front from the back of your keyfob. With a small screwdriver, you'll be able to pop the seam open and reveal a small compartment which is the battery. Remove the battery that was in it, and then insert a new one, making sure it is facing the right side up. Once everything is assembled and you are able to use your new key fob to lock or unlock your vehicle without difficulty!

Always have a spare set of keys, especially if yours is broken or has gone missing. You can purchase a new key at your local dealership or get it cut by a locksmith. It is essential that your key fob works properly as soon you can so you can drive safely.