• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that reduces loss of heat during winter months and helps keep your home cooler during the summer. Having your double glazed windows repaired as needed is an excellent way to keep them working effectively.

Over time condensation and misting may impact your double-glazed windows. Double glazed windows can be difficult to open and close.

Broken Panes

A stray ball, a flying pebble from your lawnmower, or even a storm that is heavy could break the double panes of your windows and expose your home to the elements. Although a cracked glass window isn't easy to fix however, it does not need to be replaced. In fact, the insulated glass between the two panes is still in good condition and you can fix your double-pane windows with a bit of DIY effort.

You'll first need to remove any broken glass from the frame. Be careful to avoid any glass shards falling to the floor or falling off the frame. Wear gloves for your hands and use an abrasive cloth around the damaged glass to avoid further cuts or damage. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or other debris. Sand rough areas of the window frame to create a smooth surface on which to put in your new glass.

After cleaning the frame and removing the dust, you can apply another layer of glass on the seam where you removed the broken pane. This is the best method to seal and protect your window. It can also reduce your energy bills by preventing water and drafts from entering the home. The next step is to choose your glazing material. There are several options available, including clear tape which is more durable than regular tape and can keep your window from further cracking, as well as glazing film that resembles clear plastic wrap. The benefit of this type of material is that it can be painted to match the frame you have and will also keep out rain and snow too.

Whatever material you choose regardless of the material you choose, it is essential to press glazier's facets into the place where the putty joins the frame. They will help hold the new glass in place and aid it adhere to the frame. Hardware stores carry glazier's point ropes that you can use on the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues. If you encounter this issue, it is best to contact the company that supplied the window. Many have warranties and guarantees to address the issues. Condensation or fogging between the windows' panes is a sign that your seals aren't working properly. Only an expert can fix this issue by replacing the panes.

This process is a little difficult and requires the use of specific tools to remove the old pane and install the new one, however it can be accomplished by an expert who will provide the necessary equipment. Using these tools can be risky, so it is always recommended to leave this kind task to an expert.

If you choose to do it yourself, be sure to wear safety glasses and gloves to protect yourself from any broken pieces of glass that could fly off during the process. It is essential to remove all metal or putty points from the grooves that will receive the new window. You should also wire-brush the frame and vacuum or wipe it with a damp cloth. Once the frame has dried, you'll need to order another piece of glass that's 1/8" shorter in both directions than your existing window. Test-fit the glass into the grooves.

You'll have to apply a layer of silicone caulk to the grooves of your frames to ensure your new glass is properly installed. After the silicone caulk has dried, you can smooth it out and make any necessary adjustments. The wood molding can be put back in place.

Double-glazed windows can be difficult to open or close when the weather is extremely changing. Extreme temperatures can cause frames to shrink or expand and cause them to sag or stick. You can try wiping down the frames with water and lubricating them when this happens however it is better to consult the company that installed your windows.

Misunderstood

Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of your double-glazed windows. Double glazing is comprised of two panes of glass that are separated by an insulating space, typically filled with argon gas for increased thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside and allows you to keep the temperature comfortable in your home.

This seal can fail over time, and water can accumulate between the panes of glass and cause them to become to appear misty. This occurs because the sun's heat causes the space between the window panes, which causes water to vapourize.

This is a normal process but if it happens between the window panes it could cause problems as it is no longer able to control the temperature in the room, and allows the outside temperature to affect the indoor temperature. If you notice that your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.

We can replace the blown sealed unit without needing to replace the whole window and is less disruptive than a full replacement. Our misty glass repair involves removing and cleaning the glass unit before replacing it with a new one. This creates a watertight seal again.

Certain companies in the business claim to inject chemicals through holes drilled into windows that have been misty to eliminate the condensation and fog. We do not recommend using this method. This method isn't just unsightly but could also damage the toughened glass leaving you with a window which does not function properly.

It is important to fix the problem as soon as you can, as if untreated, it could lead to mould growth, which not only damages the window, but also poses health risks for your family. Moisture can also cause other issues within your home, including dampness or rot. In some instances it is possible to replace the entire window.

Blown or Failed

Modern double glazed windows have two glass panes, with an inert gas or air between them. This improves their thermal efficiency, keeping the cold out and heat in. Over time the gas will be depressurized and cause a variety of problems.

Condensation between panes is among the most common. It is not a sign of a window failing however it could indicate that you should replace the panes. Condensation could also be an indication of broken double glazing that will need to be replaced.

Double-glazed windows can also cause drafts. This could be due to an unsound seal, a broken handle, or a broken lock. A draught can be noticeable and will lead to more expensive heating bills, so it is important to fix it sooner rather than later. You can test the seals by feeling around the edges of your window frame to determine whether you feel cold air.

Another indication that your window seals have failed is when you start to see water dripping on the inside of your windows. This is an indication that you have to seal your double-glazed windows.

Your window frames are made to move a little bit, as they need to do in order to keep the glass sheets in the right place. In time, this special packaging material may be compressed. This will cause the seal to be broken. This will allow the air to circulate between the panes, which will reduce the efficiency of your window's energy consumption.

A damaged seal is a clear sign that your double glazing has failed and should be repaired immediately. A blown seal stops your double glazing from fulfilling its primary function that is to keep the cold out and warm air in. A blown seal could let moisture in your home, which could result in mold and other unpleasant conditions. It is recommended to contact a specialist in double glazing repair when you notice a blown seal in your double-glazed windows, as they are able to replace the entire unit.