• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need find some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional is able to repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems such as sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. It's very simple to change a window hinge however it is easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us photos through our website can often resolve the problem. We are more than happy to provide advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window repair near me easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc window repair (this) can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing gaps where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could also become unbalanced. This is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace them.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be put on the top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is cheaper to replace them rather than repair them. If you are having issues with your upvc windows, it is always best to seek professional assistance immediately.