• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern day thieves can rob vehicles in less than a minute. They use the OBD port of the car to hack into the ECU and then duplicate the key and all with a laptop that is hidden inside the vehicle.

An Autowatch Ghost immobiliser stops this by transferring a sequence of pin codes through the existing buttons in your vehicle (steering wheel & central console). It is completely invisible to anyone else in your vehicle.

There are no key fobs or LED indicators or other means to locate the vehicle are in place.

If you're looking for a method to stop keyless entry theft or key cloning, then you should look no further than the ghost immobiliser. This device is designed to safeguard your vehicle from these kinds of attacks, by preventing the engine once a correct pin code is entered. This is a highly effective method of safeguarding your vehicle, and car insurance companies recognise it as a security measure that can reduce the cost of your policy.

The way in which the ghost works is by connecting to your vehicle's CAN data network, once installed by us at Car Theft Solutions it will only start when you enter the specific sequence of buttons with your personalised override code. This means that any attempt to start the vehicle without entering this code will be met with a loud alarm, and the engine won't start. The thief will then realise that they've been caught and will likely to leave the vehicle and run off.

This system has the benefit of not transmitting any signals like a tracker. Thieves cannot make use of RF receivers to pinpoint your Ghost device's location. It also doesn't emit any IR (infrared) signals, like the standard remote key fobs to control the device or trackers do, making it difficult to deceive or hack.

Another benefit of the ghost is that it features a valet mode that can be activated when you hand your vehicle over for valet parking or servicing. This will disable the immobiliser on the CAN for 30mph and enables you to use the vehicle as normal with your key fob or mobile app. When the vehicle is parked up again the ghost autowatch immobiliser will be restored to full function.

If you would like to know more about the Ghost immobiliser or want us to install it in your vehicle then contact us at Car Theft Solutions today. We are a passionate family owned business with more than 10 years of experience in vehicle security including the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our name on customer satisfaction.

No hacking, cloning, or cloning

The Autowatch ghost 2 immobiliser reviews immobiliser is one of the most advanced models on the market. It protects your vehicle from hacking and key cloning and makes it virtually impossible to steal. The only way a thief could steal your car is by physically towing it away & even then they would not be capable of starting the engine.

This is due to the fact that unlike other immobilisers which simply stop your vehicle from starting if you don't have the fob, the clever system actually shuts off the engine control unit to prevent the vehicle from being started. The system transmits messages through buttons on the steering wheel, door panel or the centre console. It is only disarmed using the proper pin code configuration.

Its sleek and discrete design allows it to fit in seamlessly into your vehicle, with no additional keys or LEDs - it runs independently from your original alarm or tracker. It's a CAN-bus immobiliser, meaning that it is part of the vehicle's control network and doesn't interfere with existing devices such as the key fob in your vehicle or alarm.

This exclusive technology is not detectable by thieves, unlike other systems that use codes and RF scanning. It only transmits pin codes silently through the buttons on your vehicle's steering wheels, door panels, or central console. The installing ghost immobiliser is a revolutionary product that protects your vehicle from theft of keyless entry and smart key theft. It does this by creating an individual pin code which needs to be entered to disable the device.

The number of keyless entry vehicles in circulation is increasing. Thieves are getting more sophisticated and are using devices to clone your vehicle that can be purchased through classifieds or online for under PS15. The cloned key fob can be used to gain access to the vehicle. A standard vehicle immobiliser stops the engine from running only if you have the original key fob, this does not offer enough security and is easy for criminals to alter or jam signals to gain access to the vehicle.

Valet mode

Standard immobilisers installed to your vehicle employ an electronic chip to send signals. The system will then search for the code transmitted by the key to begin the vehicle. If the proper signal cannot be detected, the system will cut off the power and prevent the car from starting. This is the fundamental principle behind all immobilisers that are sold on the market and is a vital security measure to ensure that your car ghost immobiliser cannot be stolen, even if someone else has your keys or a device that can boost your key fob signal.

However, a ghost immobiliser doesn't just stop it but it also goes a step further. The system, located on the CAN Bus of your Mercedes is programmed with a unique pin code that has to be entered to begin the car. This is then locked on your app and no one will ever be able to access it unless they have the same pin that you have.

The system will also stop cloning, signal jamming and hacking (which thieves may employ to bypass the immobiliser in your car). If a burglar is able to get their hands on the keys to your car or fob, they will not be able to start your car even if it is in a nearby parking lot. The only way for them to get your car away is to physically take it away on an oversized lorry that has a flatbed which is highly unlikely.

Valet mode is an option that comes with your ghost immobiliser. When it is activated the car's glove box and trunk will be locked to ensure that anyone who steals your car will not have any personal items to carry with them. It also limits the speed of your Tesla to ensure that it cannot be driven over 70mph. It will also disable insane modes. It will also block your driver profiles and hide your home / work addresses to ensure that no one other person can access your personal data on your Tesla dashboard.

If you want to use your vehicle for valet parking, or service, select the 'Valet/Service mode' on your dashboard app. Enter your 4-digit valet code onto the touchscreen. The alarm won't work, however the car will not start until you have entered a valid pin. This is a great option for those who have to hand over their vehicle to other people such as taxi drivers and garage mechanics.

The first aftermarket immobiliser for the CAN bus

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser and provides security that is unmatched by anything on the market today. It shields your car from key cloning, hacking, and even key theft. This is accomplished by integrating into your vehicle's current interface. It doesn't require any additional remotes or fobs, but instead integrates with the vehicle's data network CAN. This makes it a discreet gadget.

The device is a circuit board buried inside your car's engine control unit (ECU). It works quietly. Once activated, it will stop your vehicle from starting until a specific PIN is entered. This is a unique code you will receive when you book an installation. This number is required to enable valet mode, turn off the alarm or allow you to drive away in your friends car (if they have Ghost installed). Ghost installed too).

It is designed in a way that it is not spotted by anyone looking inside your car's interior. It it doesn't transmit radio signals and can only be heard when it's activated. It can be installed in a variety of different locations, making it almost impossible to spot. It's also low-maintenance, and can be used in combination with other anti-theft devices, such as trackers (Brand dependent), to provide an all-inclusive solution.

Many people opt to install a ghost immobiliser due to the fact that they feel standard security isn't enough to protect their pride and joy from being stolen. Physical deterrents, such as wheel clamps and steering wheel locks are excellent options, but they are not considered "theft-proof" by thieves because they are easily beaten with the proper tools. A ghost immobiliser can't, however, be beaten by a burglar as it is covertly integrated within the vehicle and if activated, it would shut down parts such as the starter motor or fuel system.

The best part is that a ghost immobiliser fitter immobiliser can be installed as low as PS450 which is a fraction of the cost of other products out there. It also can protect your vehicle from being stolen! If you're looking to add an extra layer of security to ensure your car is secure and safe call us now and we'll get it booked in for you. We accept card payments and offer a three-month interest-free credit through Klarna.