• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable property from theft. It is discreet and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence up to 20 presses. This will allow your vehicle to begin.

Simple PIN Code Change Process

With the rising rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking system may assist you in locating your car in the case of theft, it can not stop the crime from occurring in the first place. Immobilisers, however, do exactly what they state on the label - they shut down the motor of your car so that it can't be started. The Autowatch local ghost installer immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered before the car's engine will start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This option is particularly useful when you need to hand your car over for valet parking or servicing because the immobiliser will remain activated, but not disabled.

The ghost immobiliser review is an unique and innovative device that works with the buttons of your vehicle instead of as a standalone unit. This means that it's not just a powerful protection against theft of your vehicle, but it can also be transferred over to any future cars you may own, making it much more valuable than the traditional lock on your steering wheel.

Small device that is weatherproof

The Autowatch ghost immobiliser is a high-tech security device that protects your car from key cloning, hacking and ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which is the most common method used by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can even create a sequence that is up to 20 presses long for added security. The iPhone app permits a single, authorised connection, with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run only if a valid PIN is entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set such as a 30mph speed limit) and, therefore, you can give your car to an attendant or valet without having to enter the code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals to disable your car's system from running its normal startup routine until you input an individual passcode. The system can be activated or deactivated through your smartphone's app without the need for extra wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder from a different vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning, and even key theft. The only way that a burglar could take your car is by physically towing it away and even then, they would not be capable of driving it.

Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to create an individual PIN code which must be entered to use your car. This is not required to use additional hardware like keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals so thieves cannot utilize sophisticated RF scanning or code grabbing techniques to determine if the security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, ghost installation is hidden within the vehicle so it can't be removed or disabled by thieves and is even more difficult to get rid of than a car alarm, which requires disarming via an action sequence. This makes it a great complement to an GPS tracking device, which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of vehicles that have been stolen with the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle with the original keys.

The ghost immobiliser problems immobiliser was specifically designed to prevent this, and give you an additional layer of security to keep your vehicle from being targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN must be entered along with your original key fob in order to stop the vehicle from beginning. The unique override pin is found on a black card that you will receive after your installation. It is simple to remember since there are no LED indicators.

The device is hidden within the vehicle's wires, and does not emit radio signals, therefore it isn't able to be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to the tracker.

Unlike most other security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

They can also be linked to an analog alarm immobiliser, tracker or alarm. This should be decided prior to installation. They also work with valet/service modes and a great alternative to a tracker device when you take your car to the dealer for an electrical problem.

Service/Valet mode

In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. With the ease of access to key cloning equipment & door lock pick sets, it is now easier than ever for thieves to steal your pride and joy. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It is completely silent since it doesn't use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects the user from using an ECU or key to bypass the system, as only the PIN code allows the engine to be started.

The device is hidden inside your car and is reached via the buttons on your steering wheel, centre console, and door panels. Before you can begin your car, you need to enter a unique, changeable PIN code up to 20 numbers.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being started or driven away in the event that a PIN code hasn't been entered first. If the device is activated and you try to drive off it will display an indicator on your dash which will flash continuously for about 300m, if you enter your PIN code at this point it will disarm the anti-hijack device and your car will continue how to install ghost immobiliser operate in the normal way. If you do not enter your PIN at this point, the indicator will continue to flash and require another PIN code for every attempt to start your vehicle.