• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that will assist the new pane to fit properly into the frame of the window.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window repairs as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. First, you'll need close your window and do an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be put on. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is an easy process, but it's easier when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide assistance.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be misaligned due to wear, which can cause an opening where the sash and frame meet. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also become misaligned, again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts are the window seals, these can become worn down or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you have any problems with your Upvc window you should consult a professional immediately.