• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

replacement upvc door handles upvc window handle replacement Door Handles

Whether you're replacing your handles or adding a little extra security, you'll find the right handle for your door. These upvc handles are easy to fit and comply with the required 92mm centres for multipoint locks.

The most important measurements to consider are backplate fixing centres as well as lever/key hole dimensions. Check these carefully against your current measurements prior to ordering.

Lever/Pad

Lever pad handles consist of a lever on one side and a paddle-shaped handle on the opposite. These are designed to work with key wind locks, although they can also be fitted to multipoint split spindle door locks (though you'll require a separate dual spindle lock case).

Our range of upvc handles lever pads are available in a range of finishes. These will be shown in the drop down list once you have found the perfect handle for your door. Not all styles of handle are available in every finish though and it is recommended to check the technical drawings and sizes sections for the specific product you're looking for to ensure that you can get the right size and fit.

When you are choosing the new set of lever pad door handles made of upvc, it is essential to ensure that they correspond to the PZ (distance between the handle spindle and the center of the hole in the cylinder) of your current multipoint door locks, as they need to be in line for the doors to remain locked, either from the inside or outside. Our handles are designed to fit the majority of conventional cylinders, but it is always worth double glazed handles-checking before purchasing.

If you are looking to upgrade to dual spindle levers you will need to remove the handles you have already installed and disassemble the lock case. This will require an extra split inline cylinder. You can purchase these separately. We have included a technical diagram in the images of each product.

It is recommended to loosen the screws holding the door handle you have and then check the mechanism. You may need to loosen the screws a bit more when they aren't tight, and then you can take off the spindle and handle and replace it with a new upvc door handle. Before screwing the handle into the frame, it is recommended to ensure that it is in the proper position, and you can do this by placing your finger in the gap between the frame of the door and the door handle to ensure that it is in a level position.

Lever/Lever

Lever door handles operate a multi point lock using the Euro Cylinder and are found on the majority of upvc double doors, aluminium doors, and some wooden doors. They are available in two types, with an interior lever and a paddle on the outside. Sprung - these include a spring cassette within the backplate that helps bring the handle lever into a horizontal position. Non-sprung: These do NOT have a mechanism to spring the handle lever into a horizontal position.

To fix a door handle that is sagging, you will need to find the hole for access to the detent or pin, which is usually a small rectangle or round shape hole or protruding pin that is located on the opposite side of the handle base plate. Once located you can loosen the set screw using the help of a screwdriver, and then remove it to allow the lever, allowing it to return to the horizontal position.

Once the handle is positioned horizontally, you can put back the screws. Tighten them to ensure that the handle is securely attached to the base plate. Consider applying a threadlocking product to the threads of screws to increase grip and prevent the threads from becoming loose over time.

There are many reasons that door handles for levers drop. The most frequent cause is that the fixings aren't tight, causing the lever bearing to pull against the door. It could also be because the levers are not being operated at a straight angle and this is causing compression of the latch mechanism preventing it from fully springing back into operation.

A common cause of a sprung lever not working properly is that the spring is not being in the correct position on the backplate. To check whether the handle is back to horizontal, simply operate it.

If your door handles are loose it is essential to spot the issue quickly, since it could cause excessive wear on the screws and eventually to the handle falling off the base plate. It is recommended to tighten all loose screws on a regular basis, as this will help to stop them from loosening.

Lever/Snib

These upvc handles are also called "Snib handle sets" and come with an snib lock button located at the top of the door lever. If you do not have a dummy locking device, you can use this device to secure the door. These handles are fitted with the Fullex lock 68PZ. (68mm between spindle and the lock centre). We also carry a selection of other 68PZ door handles from various manufacturers, including Ferco and Fab & Fix.

Changing your door handle is an inexpensive option to modernize your home, whether replacing handles that are in use or fitting new ones to doors you've built in your house. There are a variety of styles of door handles made from upvc available with traditional levers on backplate, curved or straight short latch and knob handles that resemble dummy knobs for multi point locks which are ideal for French doors.

Lever on backplate handles are usually rectangular in shape, however there are also circular or oval shaped versions, which are known as rose door handles. These door handles are characterized by a lever or knob that is mounted on a backplate. The backplate can be removed to allow for concealed fixing.

There's a wide selection of coloured and chrome finishes available for these handles that complement your door and other hardware, like hinges, knobs, bolts and so on. Some handles come with an grub screw that can be used to connect the knob or lever securely to the spindle. Some handles come with bathroom spindles which can be used to make bathroom locks. They also have a thumbturn release mechanism and can be used on doors for bathrooms.

Mortise

If your front door's uPVC handle is stuck in the open position, the reason is most likely to be related to the tubular latch. There may be a few factors that could cause this, one of which is an unlubricated latch plate on the latch plate. It is possible to solve this issue by opening the door, spraying lubricant on the handle and locking. It could also be that the latch plate has become detached from the backplate. This is a more complicated issue that requires the help of the assistance of a specialist.

A multipoint door handle is an ideal solution to solve the issue of a door handle that is stuck. The handles are inserted into the door's faceplate and are operated with the thumb turn knob or key which activates an electronic cam that locks the deadbolt. The handles are available in a variety of sizes that will fit various types of uPVC Bi-fold doors Handle. They also come in an array of attractive finishes that complement the existing hardware. These handles are available online or from an authorized locksmith in your area. They are simple to install and come with clear instructions.

If you want to replace the handle set, you'll be required to determine the PZ dimension of the cylinder. This is the distance in millimetres between the inner edge of the door frame and the centre of the hole in the handle. You'll also require the type of lock on your door, regardless of whether it's a mortise lock or a hook lock. The most efficient way to locate the right handles once you have the measurements is to use the brand filter on the website. This will narrow down your choices and allow you to choose the appropriate size from there.

A typical handle set comes with the handle unit with a pair of various length screws drilling guides, as well as installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with keypad. These are more complicated units and are best suited for professional installers or very adept DIYers. Some handle sets include a range of other accessories, such as weather strips that can be used to improve the appearance of the door.